Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 156)

Important: Be careful when you handle the microprocessor and heat sink

. If the microprocessor and heat sink will be reused, do not contaminate

the thermal material between them.

b. Tip the top of the heat sink toward the front of the server while you slide it

away from the lower flange of the retention module; then, remove it from

the server. After removal, place the heat sink on its side on a clean, flat

surface.

1 Heat sink locking lever

2 Microprocessor

3 Heat sink

10. Release the microprocessor release lever 2 by pressing down on the end,

moving it to the side, and slowly releasing it to the open (up) position.

11. Open the microprocessor bracket frame 1 by lifting up the tab on the top

edge.

12. Carefully lift the microprocessor straight up and out of the socket, and place it

on a static-protective surface.

13. If you are instructed to return the microprocessor and heat sink, follow all

packaging instructions, and use any packaging materials for shipping that are

supplied to you.

138 ThinkServer TD100 and TD100x: Hardware Maintenance Manual

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 253 254

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 156