Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 123)

Installing a hot-swap fan

Attention:

v Replace a failed fan within 48 hours.

v To ensure proper cooling and airflow, do not operate the server for more than 30

minutes with the side cover removed.

To install a hot-swap fan, complete the following steps.

1. Unlock and remove the side cover (see “Removing the side cover” on page 78).

2. Touch the static-protective package that contains the hot-swap fan 1 to any

unpainted metal surface on the server; then, remove the fan from the package

and place it on a static-protective surface.

3. Align the fan over the bay in which you want to install the fan and lower it into

the bay. Press down on the fan until it locks into place; then, close the fan

locking handle.

4. Install the side cover (see “Installing the side cover” on page 79).

5. Lock the side cover.

6. Reconnect the external cables and power cords; then, turn on the attached

devices and turn on the server.

Chapter 4. Removing and replacing server components 105

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 253 254

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 123