Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 183)

v Follow the suggested actions in the order in which they are listed in the Action column until the problem

is solved.

v See Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to

determine which components are customer replaceable units (CRU) and which components are field

replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Error code Description Action

5962 IDE CD or DVD drive configuration error.

1. Run the Configuration/Setup Utility program and

load the default settings (see “Using the

Configuration/Setup Utility program” on page 16).

2. Reseat the following components:

v CD or DVD drive cable

v CD or DVD drive

3. Replace the components listed in step 2 one at a

time, in the order shown, restarting the server

each time.

4. (Trained service technician only) Replace the

system board

8603 Pointing-device error.

1. Reseat the pointing device.

2. Replace the following components one at a time,

in the order shown, restarting the server each

time:

a. Pointing device

b. (Trained service technician only) System

board

00012000 Processor machine check error.

1. (Trained service technician only) Reseat the

microprocessor.

2. Replace the following components one at a time,

in the order shown, restarting the server each

time:

a. (Trained service technician only)

Microprocessor

b. (Trained service technician only) System

board

0001295 ECC circuit check.

1. Reseat DIMMs

2. Replace the DIMMs, one at a time, restarting the

server each time.

00019501 Processor 1 is not functioning; check VRM

and processor LEDs.

1. (Trained service technician only) Reseat

microprocessor 1. If two microprocessors are

installed, remove microprocessor 1 and replace it

with microprocessor 2 to determine if the

microprocessor or the system board failed.

2. Replace the following components one at a time,

in the order shown, restarting the server each

time:

a. (Trained service technician only)

Microprocessor 1

b. (Trained service technician only) System

board

Chapter 5. Diagnostics 165

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 253 254

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 183

Kommentare zu diesen Handbüchern