Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 104)

Removing a CD or DVD drive

To remove a CD or DVD drive, complete the following steps.

1. Read the safety information that begins on page vii and “Installation guidelines”

on page 73.

2. Turn off the server and all attached devices; then, disconnect all power cords

and external cables.

3. Unlock and remove the side cover (see “Removing the side cover” on page 78).

4. Rotate the power-supply cage assembly out of the chassis:

v Hot-swap models:

a. Remove the hot-swap power-supply. Press down on the orange release

lever and pull the power supply out of the bay, using the handle.

b. Lift up the power-supply cage handle and pull the power-supply cage

assembly all the way up until the retainer latch locks the cage in place on

the chassis.

v Non-hot-swap models, lift up the power-supply cage handle and pull the

power-supply cage assembly all the way up until the retainer latch locks the

cage in place on the chassis.:

5. Remove the front fan cage assembly (see “Removing the front system fan cage

assembly” on page 108.

6. Disconnect the power and signal cables from the drive that is to be removed.

7. Press and hold the blue release buttons on the side of the bay to release the

drive; then, pull the drive out of the front of the server.

8. Remove the blue optical drive rails 2 from the side of the drive. Save the

optical rails to use when you install the replacement drive 1.

9. If you are instructed to return the drive, follow all packaging instructions, and

use any packaging materials for shipping that are supplied to you.

86 ThinkServer TD100 and TD100x: Hardware Maintenance Manual

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 253 254

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 104