Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 38)

4. From the list of ready drives, select the two drives that you want to group into

the array.

5. When you are prompted to select the RAID level, select RAID 0 or RAID-1.

6. (Optional) Type an identifier for the array.

7. When you are prompted for the array build method, select Quick Init.

8. Follow the instructions on the screen to complete the configuration, and select

Done to exit.

9. Restart the server.

Viewing the array configuration: To view information about the RAID array,

complete the following steps:

1. Start the Adaptec RAID Configuration Utility program.

2. Start the Array Configuration Utility.

3. From the Array Configuration Utility window, select Manage Arrays.

4. Select an array and press Enter.

5. Press Esc to exit from the program.

For additional information about using the Adaptec RAID Configuration Utility

program to create, configure, and manage arrays, see the documentation on the

IBM ServeRAID-8e (Adaptec HostRAID) Support CD.

Using RAID Manager

Important: RAID options and HostRAID are not supported on the SCO 6.0 and

UnixWare 7.14 operating systems.

Use ServeRAID Manager, which is on the IBM ServeRAID Manager Application CD,

to perform the following tasks:

v Configure a redundant array of independent disks (RAID) array

v Restore a SAS or SATA hard disk drive to the factory-default settings, erasing all

data from the disk

v View the RAID configuration and associated devices

v Monitor the operation of the RAID controllers

To perform some tasks, you can run ServeRAID Manager as an installed program.

However, to configure the integrated RAID controller or the installed ServeRAID

controller and perform an initial RAID configuration on the server, you must run

ServeRAID Manager in Startable CD mode, as described in the instructions in this

section. If you install a different type of RAID adapter in the server, use the method

that is described in the instructions that come with the adapter to view or change

settings for attached devices.

See the ServeRAID documentation on the IBM ServeRAID Support CD for

additional information about RAID technology and instructions for using ServeRAID

Manager to configure the RAID controller. Additional information about ServeRAID

Manager is also available from the Help menu. For information about a specific

object in the ServeRAID Manager tree, select the object and click Actions → Hints

and tips.

20 ThinkServer TD100 and TD100x: Hardware Maintenance Manual

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 253 254

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 38