Lenovo ThinkServer TD200x Bedienungsanleitung PDF herunterladen (Seite 88)

Removing an adapter

1 Rear adapter retention bracket

2 Adapter

3 Front adapter retention bracket

To remove an adapter, do the following:

1. Read the safety information that begins on page vii and “Handling

static-sensitive devices” on page 39.

2. Turn off the server and peripheral devices, and disconnect the power cords and

all external cables.

3. Carefully turn the server on its side so that it is lying flat, with the cover facing

up.

Attention: Do not allow the server to fall over.

4. Unlock and remove the left-side cover (see “Removing the left-side cover” on

page 42).

5. Rotate the adapter retention brackets to the open position.

6. Disconnect the cables from the adapter.

7. Remove the screw that secures the adapter to the server chassis.

8. Pull the adapter out of the adapter connector; then, lift the adapter out of the

server.

9. If you are instructed to return the adapter, follow all packaging instructions, and

use any packaging materials for shipping that are supplied to you.

Installing an adapter

The following notes describe the types of adapters that the server supports and

other information that you must consider when you install an adapter:

72 ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Installation and User Guide

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 213 214

Keine Kommentare

Lenovo ThinkServer TD200x Bedienungsanleitung Seite 88