Lenovo ThinkServer TD200x Bedienungsanleitung PDF herunterladen (Seite 86)

Removing the rear adapter retention bracket

1 Rear adapter retention bracket

2 Hinge pin

To remove the rear adapter-retention bracket, do the following:

1. Read the safety information that begins on page vii and “Handling

static-sensitive devices” on page 39.

2. Turn off the server and all attached devices; then, disconnect all power cords

and external cables.

3. Unlock and remove the side cover (see “Removing the left-side cover” on page

42).

4. Remove all adapters and place the adapters on a static-protective surface (see

“Removing an adapter” on page 72).

Note: You might find it helpful to note where each adapter is installed before

removing the adapters.

5. Open the rear adapter retention bracket.

6. Press the rear adapter retention bracket and release the top hinge point; then,

release the other hinge point and remove the bracket from the chassis.

7. If you are instructed to return the rear adapter-retention bracket, follow all

packaging instructions, and use any packaging materials for shipping that are

supplied to you.

70 ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Installation and User Guide

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 213 214

Keine Kommentare

Lenovo ThinkServer TD200x Bedienungsanleitung Seite 86