Lenovo ThinkServer TD200x Bedienungsanleitung PDF herunterladen (Seite 75)

Installing the air baffle

To install the air baffle, do the following:

1. With the rear (hinged) part of the air baffle 3 lifted up, align the positioning

pins on the ends of the air baffle with the locating holes in the server chassis

and fan-cage assembly.

2. Slide the air baffle down into the server 1 until the positioning pins fit into the

locating holes; then, press down on the air baffle until the pinch tab clicks into

place.

3. Rotate the rear (hinged) part of the air baffle 2 down to the system board.

Note: Make sure that the power-supply cage cables are not caught under the

air baffle.

4. Return the power-supply cage to its closed position (see “Closing the

power-supply cage” on page 49).

5. Install the hot-swap power supply or power supplies (see “Installing a hot-swap

power supply” on page 64).

6. Install and lock the left-side cover.

7. Reconnect the external cables and power cords; then, turn on the attached

devices and turn on the server.

Chapter 5. Installing optional devices and replacing customer replaceable units 59

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 213 214

Keine Kommentare

Lenovo ThinkServer TD200x Bedienungsanleitung Seite 75