Lenovo ThinkServer TD200x Bedienungsanleitung Seite 53

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 214
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 52
Chapter 5. Installing optional devices and replacing customer
replaceable units
This chapter provides detailed instructions for installing optional hardware devices in
the server.
Installation guidelines
Before you install optional devices, read the following information:
v Read the safety information that begins on page vii, “Working inside the server
with the power on” on page 38, “Handling static-sensitive devices” on page 39,
and the guidelines in this section. This information will help you work safely.
v When you install your new server, take the opportunity to download and apply
the most recent firmware updates. This step will help to ensure that any known
issues are addressed and that your server is ready to function at maximum levels
of performance. To download firmware updates for your server, do the following:
1. Go to: http://www.lenovo.com/support.
2. Enter your product number (machine type and model number) or select
Servers and Storage from the Select your product list.
3. Select Servers and Storage from the Brand list.
4. From Family list, select ThinkServer TD200x, and click Continue.
5. Click Downloads and drivers to download firmware updates.
v Before you install optional hardware, make sure that the server is working
correctly. If an operating system is installed, start the server, and make sure that
the operating system starts. If no operating system is installed, make sure that a
19990305 error code is displayed, indicating that an operating system was not
found but the server is otherwise working correctly. If the server is not working
correctly, refer to the Hardware Maintenance Manual for diagnostic information.
v Observe good housekeeping in the area where you are working. Place removed
covers and other parts in a safe place.
v If you must start the server while the cover is removed, make sure that no one is
near the server and that no tools or other objects have been left inside the
server.
v Do not attempt to lift an object that you think is too heavy for you. If you have to
lift a heavy object, observe the following precautions:
Make sure that you can stand safely without slipping.
Distribute the weight of the object equally between your feet.
Use a slow lifting force. Never move suddenly or twist when you lift a heavy
object.
To avoid straining the muscles in your back, lift by standing or by pushing up
with your leg muscles.
v Make sure that you have an adequate number of properly grounded electrical
outlets for the server, monitor, and other devices.
v Back up all important data before you make changes to disk drives.
v Have a small flat-blade screwdriver available.
v To view the error LEDs on the system board and internal components, leave the
server connected to power.
v You do not have to turn off the server to install or replace hot-swap fans,
redundant hot-swap ac power supplies, or hot-plug Universal Serial Bus (USB)
© Lenovo 2009. Portions © IBM Corp. 2009. 37
Seitenansicht 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 213 214

Kommentare zu diesen Handbüchern

Keine Kommentare