Lenovo 3000 J Series Bedienungsanleitung PDF herunterladen (Seite 74)

Creating diagnostic diskettes

To create diagnostic diskettes, download the PC-Doctor for DOS diagnostic

program from http://www.lenovo.com/support/ onto two blank, formatted

diskettes.

If you do not have Internet access, create the diagnostic diskettes using the

following procedure:

Note: You will need a diskette drive on your computer or a USB diskette drive to

complete this procedure.

1. Shut down the operating system and turn off the computer.

2. If you are using a USB diskette drive, plug it into the computer.

3. Repeatedly press and release the F11 key as you turn on the computer.

4. When you hear beeps or see a logo screen, stop pressing the F11 key. The

Rescue and Recovery workspace opens.

Note: For some models, press the Esc key to enter Rescue and Recovery.

5. From the Rescue and Recovery workspace, select Create diagnostic disks.

6. Follow the instructions on the screen.

7. When prompted, insert a blank, formatted diskette into the diskette drive and

continue to follow the instructions on the screen.

8. When the operation is complete, remove the diskette and click Quit.

9. Insert another blank, formatted diskette into the diskette drive and continue to

follow the instructions on the screen.

10. When the operation is complete, remove the diskette and click Quit.

Running diagnostics from the CD or diskettes

To run diagnostics from the diagnostic CD image or diagnostic diskettes that you

created, use the following procedure:

1. Make sure your computer is turned off.

2. If you are running diagnostics from diskettes using a USB diskette drive, plug

in the USB device.

3. Insert the CD into the optical drive or the first diagnostic diskette into the

diskette drive.

4. Restart the computer.

Note: If the diagnostic program does not start, you might not have your optical

drive or diskette drive set as a startable device. See “Selecting a startup

device” on page 49 for instructions on how to change the startup device.

5. When the diagnostics program opens, follow the instructions on the screen.

Note: If you are running diagnostics from a diskette, when prompted, remove

the first diskette and insert the second diskette.

6. When the program finishes, be sure to remove the CD or diskette from the

drive.

7. Select the diagnostic test you want to run. Press the F1 key for additional help.

Running diagnostics from the Rescue and Recovery workspace

If you did not create a diagnostic CD image or diagnostic diskettes, you can run

the PC-Doctor for DOS diagnostic program from the Rescue and Recovery

workspace. To run diagnostics from the Rescue and Recovery workspace, use the

following procedure:

56 User Guide

Lenovo 3000 J Series Bedienungsanleitung Seite 74

Kommentare zu diesen Handbüchern

Lenovo 3000 J Series Bedienungsanleitung Seite 74

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Lenovo 3000 J Series