5. Push the drive carrier until the foot on the base of the drive carrier engages
with the enclosure. Continue to push firmly until the handle fully closes. A
click should be heard as the latch engages and holds the handle closed.
Activating an anti-tamper lock
To active an anti-tamper lock, do the following:
1. Carefully insert the TORX* screwdriver provided into the cutout in the handle
(see 1 i the following figure).
2. Turn the screwdriver in a clockwise direction until the lock symbol is visible in
the aperture beside the key (see 2).
Figure 19. Engaging a drive carrier module in the enclosure
Figure 20. All drive carrier modules installed in enclosure
20 Secure Managed Client (SMC) - Storage Array Hardware Installation and Replacement Guide
Kommentare zu diesen Handbüchern