Lenovo Secure Managed Client Bedienungsanleitung PDF herunterladen (Seite 13)

Chapter 3. Hardware installations and upgrades

This chapter provides instructions for removing, installing, and replacing storage

system components in your Secure Managed Client (SMC) - Storage Array.

CAUTION:

v When connecting the SMC - Storage Array to a power source, use either the

power cords that shipped with the system, or match the power cord

specifications listed in the Safety and Warranty Guide.

v It is recommended that you fit and check a suitable anti-static wrist and

conductive foam pad and observe all conventional ESD precautions when

handling storage system modules and components. Avoid contact with the

backplane components and module connectors.

Before you begin

Before working with your storage system, review the important ESD precaution

and safety information in the Safety and Warranty Guide.

Tools and supplies needed

You will need the following tools and supplies when removing, installing, and

replacing your SMC - Storage Array.

v #10 TORX screwdriver

v Phillips (cross head) screwdriver (#1 and #2 bit)

v Needle-nosed pliers

v Anti-static wrist strap and conductive foam pad (recommended)

System references

All references to left, right, front, top, and bottom assume the reader is facing the

front of the storage system as it would be positioned for normal operation.

Planning your installation

Turn off your host computer and all attached peripheral devices before beginning

installation.

Attention: If the storage system is used with modules or blanking plates missing

for more than a few minutes, the system can overheat, causing power failure and

data loss. Such use may also invalidate the warranty.

All modules and/or blanking plates must be in place for the air to flow correctly

around the storage system and to complete the internal circuitry.

Before beginning your storage system installation, review the configuration

requirements listed in the Secure Managed Client - Storage Array User Guide.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Keine Kommentare

Lenovo Secure Managed Client Bedienungsanleitung Seite 13