Lenovo Secure Managed Client Bedienungsanleitung PDF herunterladen (Seite 27)

Installing a drive carrier module

To install a drive carrier module, do the following:

CAUTION:

Ensure that all drive carriers are fully engaged in the enclosure by pushing each

one firmly into its slot.

Note:

A drive carrier module cannot be installed if the anti-tamper lock has been

activated outside the enclosure. See “De-activating an anti-tamper lock” on page 21

for instructions on de-activating the lock.

1. Observe all safety and ESD precautions in the Safety and Warranty Guide.

2. Release the drive carrier handle by depressing the latch in the handle.

3. Insert the drive carrier module into the drive bay.

Note: Ensure that the carrier is oriented so that the drive is at the top of the

carrier and the handle opens from the left, as shown in the above figure.

4. Carefully slide the drive carrier module all the way into the enclosure.

Figure 17. Unlatching a drive carrier module

Figure 18. Installing a drive carrier module

Chapter 3. Hardware installations and upgrades 19

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Keine Kommentare

Lenovo Secure Managed Client Bedienungsanleitung Seite 27