Lenovo 6431 Bedienungsanleitung PDF herunterladen (Seite 137)

c. Tip the top of the fan sink toward the front of the server while you slide it

away from the lower flange of the retention module; then, remove it from

the server. After removal, place the fan sink on its side on a clean, flat

surface.

Attention: The microprocessor retention latch is spring-loaded when the

microprocessor is in place. Releasing the latch too quickly or allowing it to

spring upward can damage the microprocessor and surrounding components.

7. Release the microprocessor retention latch 1 by pressing down on the end,

moving it to the side, and slowly releasing it to the open (up) position.

8. Open the microprocessor bracket frame 2 by lifting up the tab on the top

edge.

9. Carefully lift the microprocessor straight up and out of the socket, and place it

on a static-protective surface.

10. If you are instructed to return the microprocessor and fan sink, follow all

packaging instructions, and use any packaging materials for shipping that are

supplied to you.

Chapter 4. Removing and replacing server components 119

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 283 284

Keine Kommentare

Lenovo 6431 Bedienungsanleitung Seite 137