Lenovo 6431 Bedienungsanleitung PDF herunterladen (Seite 124)

Removing the mini-SAS/SATA controller

To remove the mini-SAS/SATA RAID controller, complete the following steps:

1. Read the safety information that begins on page vii and “Installation guidelines”

on page 57.

2. Turn off the server and all attached devices; then, disconnect all power cords

and external cables.

3. Unlock and remove the side cover (see “Removing the side cover” on page 62).

4. Open the rear adapter-retention bracket until the release lever on the right side

of the bracket clicks into place.

5. Squeeze the tabs on both sides of the connector on the signal cable and

remove the cable from the SAS/SATA controller .

1 Mini-PCI controller slot 3 Alignment holes

2 Alignment pins 4 Mini-SAS/SATA controller

6. Carefully disengage the tabs on each side of the SAS/SATA controller connector

and the front of the SAS/SATA controller from the plastic standoff.

7. Grasp the edges of the SAS/SATA controller and pull it out of the connector. If

the standoff comes away from the system board with the controller, gently pull it

out of the controller and push it back into the hole on the system board.

8. If you are instructed to return the SAS/SATA controller, follow all packaging

instructions, and use any packaging materials for shipping that are supplied to

you.

106 ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 283 284

Keine Kommentare

Lenovo 6431 Bedienungsanleitung Seite 124