Lenovo Secure Managed Client Bedienungsanleitung PDF herunterladen (Seite 24)

Provisioning the storage array

Provisioning is the process where you configure the storage array to work with the

Secure Managed Client console.

To provision the storage array, do the following:

1. Click SMC Manager in the Toolbox panel on the left. If the toolbox is not

shown, click View on the taskbar and then click Toolbox.

2. Right click Storage Arrays in the SMC Manager window and click Add.

3. Enter the information in the Initialize storage array window.

a. Enter the current IP address of the storage array in the Initial IP Address

field and enter your password.

b. Enter the IP address that you want the storage array to have after

provisioning in the Static IP Address field. Fill out additional fields as

necessary.

c. If the storage array has a fully qualified domain name, enter that in the

Host name (FQDN) field or enter the same IP address as was entered in the

step above.

4. Click Initialize and then Proceed at the overwrite-existing-data warning.

Creating a standard base image

To create a standard base image, do the following. See “Image types” on page 18

for information on creating other types of base images.

1. In the SMC Manager window, identify the storage array you just provisioned

in the Storage Arrays tree in the left panel and expand the storage array’s

entry.

2. Right click on Base Image and click New Base Image.

3. Fill in the information about the new base image.

a. Enter the name for the base image (such as WinXP Image) and a short

description of it, if desired.

b. Choose an appropriate size for the image. This size will propagate to all

user images created from this base image.

c. If you want users created from this image to be able to boot to CD or if you

plan to populate the image from a CD, check Include CD-ROM in the boot

order.

4. Click Create.

After successful completion, the base image will be listed under the Pending

branch of the Base Images entry under the storage array.

Populating a base image

See Chapter 7, “Populating a base image,” on page 41 for information on

populating a base image.

Creating a standard image or single image user image

Configuring Active Directory Manager in LANDesk: To configure the AD

Directory Manager in LANDesk, do the following:

1. In the LANDesk Management Suite taskbar, click Tools −> Distribution −>

Directory Manager.

2. In the Directory Manager window, click the Manage Directory icon (folder

superimposed with a gold key).

3. Click Add in the floating Directory Manager window.

4. Enter the information for the AD server/domain controller and click OK.

16 Secure Managed Client Version 2.0 Deployment Guide

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo Secure Managed Client Bedienungsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Lenovo Secure Managed Client