Lenovo Secure Managed Client Bedienungsanleitung PDF herunterladen (Seite 18)

Table 2. Storage array hard disk drive size (continued)

Storage Array: Effective Secure Managed Client User HDD Size

Number of User

Images 6 TB Storage Array 9 TB storage array 12 TB storage array

50 100 GB / client 150 GB / client 200 GB / client

To calculate the number of users that can be placed on a storage array, use the

following formula:

Number of users = [(11* disk size -15) / (base image size)] - 2.5 * number of base images

Notes:

1. All sizes are in gigabytes.

2. 15 represents 15 GB of reserved space for Secure Managed Client boot images

and management data.

3. The maximum number of unique images that can be placed on a single storage

array is 250.

4. The maximum number of active users on a single storage array is 150.

5. Performance of the Secure Managed Client solution is impacted by the number

of active users.

Secure Managed Client manual setup

1. Flash the BIOS on the machine with the latest Secure Managed Client Flash

BIOS update.

2. If the system has a hard disk drive, unplug the drive connector.

3. Reboot and press F1 to boot into the BIOS setup screen.

4. Press F9 Setup Defaults to set defaults before making any changes.

v For M57 machines: In IDE Drives Setup, set Serial ATA to Enabled, Native

Mode Operation to Serial ATA, SATA Raid Enable to Disabled, and SATA

AHCI Enable to Disabled.

v For M58 machines, In ATA Drives Setup, set External SATA Port to

Enabled, Serial ATA to Enabled, Native Mode Operation to Enabled, SATA

Raid Enable to Disabled, and SATA AHCI Enable to Disabled.

v For M57 machines: In Network Setup, set LAN options ROM to SMC Boot.

v For M58 machines: In Network Setup, set Boot Agent to SMC.

7. Include PCI SCSI in the startup sequence.

8. Exclude IDE HDD from the startup sequence.

v For M57 machines: In Advanced, set Intel Virtualization Technology to

Enabled.

v For M58 machines: In Advanced, CPU Setup, set Intel Virtualization

Technology to Enabled.

10. Press F10 to save and restart.

11. Perform a hard shutdown by powering off the machine.

12. Turn the machine on and press Ctrl and D when you see the Intel iSCSI Boot

screen, which appears immediately after the first Lenovo splash screen.

10 Secure Managed Client Version 2.0 Deployment Guide

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 71 72

Keine Kommentare

Lenovo Secure Managed Client Bedienungsanleitung Seite 18