Lenovo 41N5631 Bedienungsanleitung PDF herunterladen (Seite 16)

Hardware and software requirements

You must have the following hardware installed on your host computer in order to use this option:

v Available USB 2.0 port

Your computer must have one of the following operating systems installed to use this option:

v Microsoft

Windows

v Microsoft Windows 2000 (Service Pack 4 or later)

Note: The drive will not operate correctly unless Service Pack 4 or later is installed.

Preparing to use the Lenovo USB 2.0 Super Multi-Burner Drive (With

LightScribe)

Before using the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe), follow the procedure

below:

1. Make sure the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) is properly connected to

your host computer (Please refer to the “Power mode configurations” on page 1-5).

2. Check the locations of the functions on the Lenovo USB 2.0 Super Multi-Burner Drive (With

LightScribe) (refer to the figures below).

3. Insert the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) Software and User’s Guide Super

CD that was shipped with this option to install the CD-R/CD-RW/DVD writing software.

4. Double-click on the application you want and follow the instructions on the screen.

5. Check that the drive operates normally and keep the enclosed warranty in a safe place after filling it

in.

Following are the locations of the functions on the host USB 2.0 Super Multi-Burner Drive:

1 Disc tray Firmly seat the media with the label face up on the disc tray.

Attention: Push the CD/DVD media down until it clicks and is secure in the

center.

2 DC IN connector Connect the provided AC adapter into the DC IN connector.

3 USB connector Insert the plug of the provided dedicated USB cable.

1-4 Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

Keine Kommentare

Lenovo 41N5631 Bedienungsanleitung Seite 16