Lenovo 41N5631 Bedienungsanleitung PDF herunterladen (Seite 17)

4 Power indicator The green LED indicates the power status of the drive.

v LED is on: when the drive is connected in any of the supported power

configurations of your computer.

v LED is off: when the drive is not connected to the USB port or AC adapter.

5 Emergency eject When ejecting the media with the power off, insert paper clip into the

emergency eject hole to open the disc tray.

45 mm

1.8 in

Attention: Be sure the power is off when using the emergency eject. Use the

eject button instead of the emergency eject except in an emergency.

6 Eject button Press this button to open the disc tray.

Attention: An electrical locking mechanism is used in this drive so that an

erroneous operation does not open the to disc tray during write. Make sure that

the power is on and the drive is not in operation before pressing the eject

button to open the disc tray.

If the disc tray cannot be opened even when the eject button is pressed or if the

disc tray needs to be opened when power is not supplied from the AC adapter,

use the emergency eject hole5 in front of the drive.

Check that nothing is placed in front of the disc tray when ejecting. When

normal ejection is impossible, an error message may appear on your computer.

When ejection is not performed normally, open the disc tray manually and close

it securely.

7 Busy indicator LED blinks: during data read or write.

Power mode configurations

This section provides installation instructions for the following configurations:

v Configuration 1: Connecting the drive using self power with AC adapter

v Configuration 2: Connecting the drive using USB standard bus power

Chapter 1. Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) 1-5

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Keine Kommentare

Lenovo 41N5631 Bedienungsanleitung Seite 17