Lenovo ThinkServer TD100x Bedienungsanleitung PDF herunterladen (Seite 21)

ThinkServer TD100x features and specifications (Machine Types 4203,

4204, 4205, 4206)

The following information is a summary of the features and specifications of the

server. Depending on the server model, some features might not be available, or

some specifications might not apply.

Table 2. Features and specifications

Microprocessor:

v Intel Xeon

™

dual-core or quad-core with 12

MB Level-2 cache

Important: Do not use dual-core and

quad-core processors in the same server.

v Support for up to two microprocessors

v Support for Intel Extended Memory 64

Technology (EM64T)

Note:

Use the Configuration/Setup Utility

program to determine the type and speed of the

microprocessors.

Memory:

v Minimum: 1 GB depending on server model,

expandable to 48 GB

v Type: 667 MHz, PC2-5300, ECC Fully

Buffered DIMMs (FBD) with double data rate

(DDR) II, SDRAM

v Connectors: Twelve 240-pin dual inline

memory module (DIMM) connectors

Drives:

v IDE:

– DVD (standard)

– CD, CD-RW, DVD/CD-RW (optional)

– Maximum of two devices can be installed

v Diskette (optional): External USB 1.44 MB

v Supported hard disk drives:

– Serial Attached SCSI (SAS)

– Serial Advanced Technology Attachment

(SATA)

Expansion

bays:

v Eight hot-swap SAS, 3.5-inch bays or 12

hot-swap SAS, 2.5-inch bays

v Three half-high 5.25-inch bays (DVD drive

installed)

Note: Full-high devices such as an optional

tape drive will occupy two half-high

5.25-inch bays.

PCI

and PCI-X expansion slots:

v Six PCI expansion slots

– Three PCI Express x8 (two x8 links and

one x4 link) slots

– One PCI 33 MHz/32-bit slot

– Two PCI-X 2.0 133 MHz/64-bit slots

Upgradeable

microcode:

System BIOS, service microprocessor, BMC, and

SAS microcode

Power supply:

Note: To upgrade to two 835-watt hot-swap

power supplies, install the redundant power and

cooling option kit. Kit includes one 835-watt

power-supply and three hot-swap fans.

v Standard: One 835-watt 110 V or 240 V ac

input dual-rated power supply

v Upgradeable to two 835-watt hot-swap power

supplies

Hot-swap fans:

v Three (standard)

v Upgradeable to six fans (for redundant

cooling)

Note:

To upgrade to redundant cooling, install

the redundant power and cooling option kit. Kit

includes one 835-watt hot-swap power-supply

and three hot-swap fans.

Size:

v Tower

– Height: 440 mm (17.3 in.)

– Depth: 747 mm (29.4 in.)

– Width: 218 mm (8.6 in.)

– Weight: approximately 38 kg (84 lb) when

fully configured or 20 kg (42 lb) minimum

Rack

– 5 U

– Height: 218 mm (8.6 in.)

– Depth: 696 mm (27.4 in.)

– Width: 424 mm (16.7 in.)

– Weight: approximately 34 kg (75 lb) when

fully configured or 20 kg (42 lb) minimum

Racks

are marked in vertical increments of 4.45

cm (1.75 inches). Each increment is referred to

as a unit, or “U.” A 1-U-high device is 4.45 cm

(1.75 inches) tall.

Integrated functions:

v Baseboard management controller (Intelligent

Platform Management Interface (IPMI) 2.0

compliant)

v Service microprocessor support for Remote

Supervisor Adapter II SlimLine

v Light path diagnostics

v ServeRAID-8k (512 MB with battery backup)

and ServeRAID-8s SAS Controllers support

RAID levels 0, 1, 1E, ,10, 5, 6, 50, and 60

Note: The server will not start without a

RAID controller installed.

– Eight 3.5–inch hard disk drive models:

ServeRAID-8k-l or ServeRAID-8k

– Twelve 2.5-inch hard disk drive models:

ServeRAID-8k and ServeRAID-8s

v Four Universal Serial Bus (USB) ports (2.0)

– Two on rear of server

– Two on front of server

v Broadcom 5721 and 5721KFB3 10/100/1000

Gigabit Ethernet controllers

v ATI PCI ES1000 video

– 16 MB video memory

– VGA and SVGA compatible

v ATA-100 single-channel IDE controller (bus

mastering)

v Vitesse VSC7250 SAS/SATA RAID controller

v Mouse connector

v Keyboard connector

v Serial connector

Acoustical noise emissions:

v Sound power, idle: 5.5 bel declared

v Sound power, operating: 6.0 bel declared

Environment:

v Air temperature:

– Server on: 10° to 35°C (50.0° to 95.0°F);

altitude: 0 to 2134 m (7000 ft)

– Server off: -40° to 60°C (-40.0° to 140.4°F);

maximum altitude: 2134 m (7000 ft)

Humidity:

– Server on: 8% to 80%

– Server off: 8% to 80%

Heat

output:

Approximate heat output in British thermal units

(Btu) per hour:

v Minimum configuration: 2013 Btu per hour (590

watts)

v Maximum configuration: 2951 Btu per hour (865

watts)

Electrical

input:

v Sine-wave input (50-60 Hz) required

v Input voltage low range:

– Minimum: 100 V ac

– Maximum: 127 V ac

Input voltage high range:

– Minimum: 200 V ac

– Maximum: 240 V ac

v Approximate input kilovolt-amperes (kVA):

– Minimum: 0.60 kVA

– Maximum: 0.88 kVA

Notes:

1. Power consumption and heat output vary

depending on the number and type of optional

features that are installed and the

power-management optional features that are

in use.

2. These levels were measured in controlled

acoustical environments according to the

procedures that are specified by the American

National Standards Institute (ANSI) S12.10 and

ISO 7779 and are reported in accordance with

ISO 9296. Actual sound-pressure levels in a

given location might exceed the average stated

values because of room reflections and other

nearby noise sources. The declared

sound-power levels indicate an upper limit,

below which a large number of computers will

operate.

Chapter 1. Introduction 5

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo ThinkServer TD100x Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Lenovo ThinkServer TD100x