Lenovo Storage Array 8332 Bedienungsanleitung PDF herunterladen (Seite 14)

8.89-cm (3.5-inch) form factor drive. In addition, two 6.35-cm (2.5-inch) boot drives

can be installed in the boot drive module.

Note:

A bay is defined as the space required to house a single 2.54-cm (1.0-inch)

high 8.89-cm (3.5-inch) disk drive in its carrier module (limitation of 1 TB

size).

At the rear, the chassis assembly accommodates one PSU and a server board

subsystem.

A top cover on the enclosure provides access to the cooling fans and the server

board subsystem.

Note:

The enclosure cover should only be removed by qualified service personnel

as it provides access to a service area. Upon replacement, the cover MUST

be secured by tightening the lock mechanism to the locked position with a

screwdriver.

Server board subdivision

The server board subdivision consists of:

v An Intel Server Board S5000PSL

v Slots for up to six low-profile 1.905-cm (3/4-inch) PCI cards, installed in a

vertical orientation. The following PCBs are installed as standard configuration:

– An Intel RAID Controller SRCSATAWB, in the left-hand slot (when viewed

from the rear)

v A boot drive module, which contains two 6.35-cm (2.5-inch) SATA boot drives

Server board I/O panel

The server board I/O panel consists of various connectors and LEDs.

Figure 6. Locking the enclosure cover

Figure 7. Server board I/O panel connectors

6 User Guide

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Keine Kommentare

Lenovo Storage Array 8332 Bedienungsanleitung Seite 14