Lenovo ThinkServer RD540 Bedienungsanleitung PDF herunterladen (Seite 63)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 45

Setup Requirements

Table 4 and Table 5 provide the requirements for applying NPAR functionality to 8200 and 3200 Series

Adapters installed in host servers within SANs.

Table 4. NPAR Operating System Requirements

Operating Systems Platforms

Linux

• RHEL5.6 and later, x86 and x64

• RHEL6.0 and later, x64 only

• SLES10 SP4 and later, x64 only

• SLES11 SP1 and later, x64 only

Citrix

•XenServer

6.0 and later

Windows

• Windows Server 2008 SP2, Windows Server 2008 R2 SP1

—Hyper-V

If a partitioned NIC is configured for use in a Hyper-V network virtualization stack, virtual message queue (VMQ) must be

enabled. To enable VMQ on a management OS with physical network adapters less than 10Gbps, enter the following command

in a command prompt window: reg add

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VMSMP\Parameters /v

BelowTenGigVmqEnabled /t REG_DWORD /d 1 /f

For the latest list of operating systems that support NPAR for QLogic Adapters, please check http://driverdown-

loads.qlogic.com.

Table 5. NPAR Management Tool and Driver Requirements

SW Components Description

Management Tools

QLogic OptionROM Flash image containing firmware and boot code

QLogic QConvergeConsole

GUI/CLI

Management tools that can be utilized for NPAR configuration

and management

QLogic Device Windows

Properties Page

Can be used for NPAR configuration and management in Win-

dows

Drivers

Adapter drivers NIC, FCoE, and iSCSI drivers

Management tools and drivers are located on the QLogic Web site

http://driverdownloads.qlogic.com.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 131 132

Keine Kommentare

Lenovo ThinkServer RD540 Bedienungsanleitung Seite 63