Lenovo TS200V Bedienungsanleitung PDF herunterladen (Seite 60)

7. Carefully pull on the tips of the rubber mounts until the new rear fan assembly

is secured in place.

8. Connect the new rear fan assembly cable to the system fan connector on the

system board. See “System-board internal connectors” on page 14.

What to do next:

v To work with another piece of hardware, go to the appropriate section.

v To complete the replacement, go to “Completing the parts replacement.”

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall

the server cover and reconnect cables.

To reinstall the server cover and reconnect cables to your server, do the following:

1. Make sure that all components have been reassembled correctly and that no

tools or loose screws are left inside your server. See “Internal components” on

page 15 for the locations of various components in your server.

2. If you have removed the front bezel, reinstall it. See “Removing and reinstalling

the front bezel” on page 19.

3. Make sure that the cables are routed correctly before reinstalling the server

cover. Keep cables clear of the hinges and sides of the server chassis to avoid

Figure 32. Installing the rear fan assembly

44 Installation and User Guide

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 95 96

Keine Kommentare

Lenovo TS200V Bedienungsanleitung Seite 60