ManageAP mode
To configure the settings of the wireless display adapter in ManageAP mode, do the following:
1. Connect your notebook computer to the wireless display adapter through Wi-Fi connection. The
wireless display adapter is identified with the ManageAP SSID name displayed at the bottom-right
corner on the monitor screen. And no password is needed.
2. Open the Web browser and then type 192.168.16.1 into the address bar. The Web page for setting the
wireless display adapter is displayed.
3. Type the account name and password, and then click OK. By default, both the account name and
password are admin.
4. Configure the settings of the wireless display adapter according to your needs.
Recovery mode
To configure the settings of the wireless display adapter in recovery mode, do the following:
1. Press and hold the Mode/WPS button, and then turn on the wireless display adapter. Wait for several
seconds, and the splash screen will be displayed on the monitor.
2. Connect your notebook computer to the wireless display adapter through Wi-Fi connection. You can
identify the wireless display adapter by the ManageAP service set identifier (SSID) name displayed on
the monitor screen. And no password is needed.
3. Open the Web browser and then type 192.168.16.1 into the address bar. The Web page for setting the
wireless display adapter is displayed.
4. Type the account name and password, and then click OK. By default, both the account name and
password are admin.
5. Configure the settings of the wireless display adapter according to your needs.
Updating firmware of the wireless display adapter
To update firmware of the wireless display adapter, do the following:
Note: Ensure that both the wireless display adapter and the notebook computer are connected to the
electrical outlets while updating firmware of the wireless display adapter.
1. Download the latest firmware to your notebook computer from:
http://www.lenovo.com/support/WDA
Note: For ManageAP mode and recovery mode, the firmware version is different. Ensure that you
download the correct firmware version.
2. Connect your notebook computer to the wireless display adapter through Wi-Fi connection. You can
establish the connection either in ManageAP mode or in recovery mode. For detailed information, refer
to “Configuring the wireless display adapter” on page 11.
3. Open the Web browser and then type 192.168.16.1 into the address bar. The Web page for setting the
wireless display adapter is displayed. Then click the Firmware tab.
4. Click Browse near the New Firmware field to select the firmware that you have downloaded.
5. Click Upload new Firmware. Then follow the instructions on the screen to update the firmware of
the wireless display adapter.
If you fail to update the firmware of the wireless display adapter in the ManageAP mode, update the firmware
in the recovery mode or reset the wireless display adapter to the default settings. To reset the wireless
display adapter to the default settings, do the following:
12
ThinkPad Enterprise Wireless Display Adapter User Guide
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern