Lenovo 0C52865 Betriebsanweisung PDF herunterladen (Seite 17)

1. Open the Web browser and then type 192.168.16.1 into the address bar. The Web page for setting the

wireless display adapter is displayed. Then click the Basic tab.

2. Click Restore Defaults. The wireless display adapter restarts automatically. Then the wireless display

adapter is reset to the default settings.

Using the NFC tag with Lenovo QuickDisplay

The NFC tag is used to establish the radio communications between your notebook computer and the

wireless display adapter quickly and conveniently. The NFC tag can be assigned to only one speciﬁc

wireless display adapter at a time.

Note: The NFC tag is supported only on the Windows 7 and Windows 8.1 operating systems.

Before using the NFC tag, ensure that your notebook computer has the following items installed:

• NFC reader

• Lenovo QuickDisplay 1.2 (for Windows 7)

• Lenovo QuickDisplay 2.0 (for Windows 8.1)

Notes:

• The Lenovo QuickDisplay program can be supported by certain computer models. To check whether the

Lenovo QuickDisplay program can be installed on your notebook computer, go to the Lenovo Support

Web site at http://www.lenovo.com/support/WDA.

• If you want to install Lenovo QuickDisplay 2.0 on your notebook computer, ensure that your computer

is equipped with an NFC reader. Otherwise the installation will fail.

To establish a connection between the wireless display adapter and your notebook computer with the NFC

tag, do the following:

For Windows 7:

1. Start the Lenovo QuickDisplay program.

2. Scan the NFC tag on the NFC reader of your notebook computer.

3. When prompted, press the Mode/WPS button or enter the PIN code displayed on the monitor screen.

Then the connection is established automatically.

Note: If your notebook computer has been connected to the wireless display adapter before, the connection

is established automatically after scanning the NFC tag on the NFC reader.

For Windows 8.1:

1. Scan the NFC tag on the NFC reader of your notebook computer.

2. When prompted, press the Mode/WPS button or enter the PIN code displayed on the monitor screen.

Then the connection is established automatically.

Notes:

• If your notebook computer has been connected to the wireless display adapter before, the connection is

established automatically after scanning the NFC tag on the NFC reader of your notebook computer.

• If the name of the wireless display adapter has been changed before scanning the NFC tag, change the

name of the NFC tag in Lenovo QuickDisplay 2.0.

Chapter 3. Using the wireless display adapter 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

Keine Kommentare

Lenovo 0C52865 Betriebsanweisung Seite 17