Lenovo IdeaCentre B305 Bedienungsanleitung PDF herunterladen (Seite 21)

Chapter 5. Using the Setup Utility

Selecting a startup device

If your computer does not start up (boot) from a device such as the

CD-ROM, diskette, or hard disk as expected, use one of the following

procedures to select a startup device.

Selecting a temporary startup device

Use this procedure to startup from any boot device.

Note: Not all CDs, hard disks, and diskettes are bootable.

1. Turn oﬀ your computer.

2. Press and hold the F12 key then turn on the computer. When the

Startup Device Menu appears, release the F12 key.

Note: If you are using a USB keyboard and the Startup Device Menu

does not display using this method, repeatedly press and release

the F12 key rather than leaving it pressed when turning on the

computer.

3. Select the desired startup device from the Startup Device Menu and

press Enter to begin.

Note: Selecting a startup device from the Startup Device menu does

not permanently change the startup sequence.

Selecting or changing the startup device sequence

To view or permanently change the conﬁgured startup device sequence,

do the following:

1. Start the Setup Utility program (see “Starting the Setup Utility program”

on page 15).

2. Select Start Up.

3. Select Quick Boot Mode, Numlock, Option Keys Display, Option Keys

Display Style or Startup Device Menu Prompt to set these devices.

4. Select Disabled or Enabled and press Enter.

5. Press ESC to return to Exit and select Save changes and Exit.

If you have changed these settings and want to return to the default

settings, select Load Optimal Defaults on the Setup Utility menu.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Keine Kommentare

Lenovo IdeaCentre B305 Bedienungsanleitung Seite 21