Lenovo IdeaCentre B305 Bedienungsanleitung PDF herunterladen (Seite 20)

Hardware Maintenance Manual

3. The password dialog box will be displayed. Type the new password, and

press Enter.

4. when prompted to conﬁrm the password, type the password again. If

you type the password correctly, the password will be installed.

To delete a previously set Power-On Password, do the following :

1. From the Security menu, select Set Power-On Password and press

Enter.

2. The password dialog box will be displayed. Press Enter in New Password

and conﬁrm New Password dialog. A setup notice will display that

changes have been saved.

3. Select Exit.

4. Select Save changes and Exit.

Using Device

Device is used to enable or disable user access to the following device

USB Setup When this feature is set to Disable,

the device of USB Setup is

disabled and will not be displayed in

the system conﬁguration.

To set Device, do the following:

1. Start the Setup Utility program (see “Starting the Setup Utility program”

on page 15).

2. From the Setup Utility program menu, select Devices.

3. Select USB Setup.

4. Select Disabled or Enabled and press Enter.

5. Return to the Setup Utility program menu and press F10 to save

conﬁguration changes and exit setup.

Note

If you do not want to save the settings, select Exit and select Discard

changes and Exit.You can set others such as Audio Setup and

Network Setup. See the information displayed on the right side of

the screen.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Keine Kommentare

Lenovo IdeaCentre B305 Bedienungsanleitung Seite 20