5. Position the mini-PCI-X enablement card over the mini-PCI slot connector and
the plastic standoff. Press the mini-PCI-X enablement card firmly into the
mini-PCI slot connector and into the mini-PCI-X enablement card connector,
and then onto the plastic standoff.
1 Mini-PCI slot connector
2 Mini-PCI-X enablement card
3 Mini-PCI-X enablement card connector
6. Install and lock the side cover (see “Reinstalling the side cover” on page 52).
7. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
Installing a hot-swap power supply
The following notes describe the type of power supply that the server supports
and other information that you must consider when you install a power supply:
v The type and number of power supplies vary by server model. The server comes
with at least one power supply.
v Some servers come with a hot-swap power supply that supports redundant
mode. The redundant mode requires two operational hot-swap power supplies
in the server.
This
procedure applies only to server models that have hot-swap power supplies.
If the server contains a non-hot-swap power supply that requires replacement, the
power supply must be replaced by a service technician.
When you remove or install a hot-swap power supply, observe the following
precautions.
Statement 8:
46 ThinkServer TS100 Types 6431, 6432, 6433, and 6434: User Guide
Kommentare zu diesen Handbüchern