Lenovo THINKSERVER RD230 Bedienungsanleitung PDF herunterladen (Seite 82)

3. Remove the heat sink assembly. See “Removing the heat sink assembly” on

page 69.

4. Disconnect the system fan cables on the system board. See Figure 6 on page 34.

5. Carefully lift the system fan straight up to remove it out of the server. Then,

place it on a static-protective surface.

6. If you are instructed to return the system fans to the manufacturer, follow all

packaging instructions, and use any packaging materials that are supplied to

you for shipping.

7. To install the system fans, see “Installing the system fans.”

Installing the system fans

Attention

Do not open your server or attempt any repair before reading and understanding the Safety

Information and the Warranty and Support Information on the ThinkServer Documentation DVD

that comes with your product, and “Guidelines” on page 37. To obtain a copy of the

publications, go to:

http://www.lenovo.com/support

This section provides instructions on how to install the system fans.

To install the system fans, do the following:

1. Remove all media from the drives and turn off all attached devices and the

server. Then, disconnect all power cords from electrical outlets and disconnect

all cables that are connected to the server.

2. Remove the server cover. See “Removing the server cover” on page 42.

3. Remove the heat sink assembly. See “Removing the heat sink assembly” on

page 69.

76 ThinkServer RD230 Types 1043, 1044, 4010, and 4011: Hardware Maintenance Manual

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 147 148

Keine Kommentare

Lenovo THINKSERVER RD230 Bedienungsanleitung Seite 82