Lenovo IdeaCentre Q110 Bedienungsanleitung PDF herunterladen (Seite 41)

Chapter 7. Replacing hardware

Replacing the remote control

Note:

Remove the batteries from a non-working remote control before you

return it to Lenovo for a replacement.

Completing the installation

After replacing the parts, you need to close the computer cover and

reconnect the cables, including telephone lines and power cables. Also,

depending on the part that was replaced, you might need to conﬁrm the

updated information in the Setup Utility program. Refer to “Starting the

Setup Utility” in the User Guide or in the Hardware Maintenance Manual.

To complete a parts installation (completing the parts

installation of your actual computer should be taken as

the ﬁnal step):

1. Ensure that all components have been reassembled correctly and that

no tools or loose screws are left inside your computer. Refer to “Locating

components and ports/sockets” for the location of the various

components.

2. Make sure that the cables are connected correctly before installing the

computer cover.

Important

Correctly route all power supply cables to avoid interference with the

drive bay assembly. Keep cables clear of the hinges and sides of the

computer chassis.

3. Position the computer cover on the chassis so that the tabs on the

cover align with the slots of the chassis.

4. Carefully install the cover as shown, until it securely snaps into place.

5. Screw back the six screw to the chassis.

6. Reconnect the external cables and power cords into the computer.

Refer to “Locating components and ports/sockets”.

1 2 ... 36 37 38 39 40 41 42 43 44

Keine Kommentare

Lenovo IdeaCentre Q110 Bedienungsanleitung Seite 41