Lenovo 6306 Bedienungsanleitung PDF herunterladen (Seite 29)

Note: If you do not want to save the settings, select Discard Changes and Exit.

To

set the Floppy A, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on

page 19.

2. From the Setup Utility program menu, select Devices → Floppy Drive Setup →

Floppy A.

3. Select the desired settings and press Enter.

4. Return to the Setup Utility program menu and select Exit → Save Changes and

Exit.

Note: If you do not want to save the settings, select Discard Changes and Exit.

Selecting a startup device

If your computer does not start up from a device such as the CD/DVD-ROM,

diskette, or hard disk drive as expected, use one of the following procedures to

select a startup device.

Selecting a temporary startup device

Use this procedure to startup from any start device.

Note: Not all discs, hard disk drives, and diskettes are bootable.

1. Turn off your computer.

2. Press and hold the F12 key, then turn on the computer. When the Startup

Device Menu appears, release the F12 key.

Note: If you are using a USB keyboard and the Startup Device Menu does not

display using this method, repeatedly press and release the F12 key

rather than leaving it pressed when turning on the computer.

3. Select the desired startup device from the Startup Device Menu and press Enter

to begin.

Note:

Selecting a startup device from the Startup Device menu does not

permanently change the startup sequence.

Selecting or changing the startup device sequence

To view or permanently change the configured startup device sequence, do the

following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on

page 19.

2. Select Startup → Startup Sequence.

3. See the information displayed on the right side of the screen.

4. Select the devices for the Primary Startup Sequence, the Automatic Startup

Sequence, and the Error Startup Sequence.

5. From the Setup Utility menu, select Exit → Save Changes and Exit.

If you have changed these settings and want to return to the default settings, select

Load Default Settings on the Exit menu.

Chapter 5. Using the Setup Utility 21

Lenovo 6306 Bedienungsanleitung Seite 29