Lenovo Computer Monitor 7098 Bedienungsanleitung PDF herunterladen (Seite 124)

Removing and replacing the front bezel

This procedure describes how to remove and replace the front bezel.

1. Remove the computer cover. See “Removing the cover” on page 117.

2. Remove the front bezel by releasing the three plastic tabs inside the chassis and

pivoting the bezel outward. Carefully set the bezel to the side without

disconnecting the power switch and LED assembly cable.

3. To reinstall the bezel, align the plastic tabs on the right side of the bezel with

the corresponding holes in the chassis, then pivot it inward until it snaps into

position on the left side.

4. Go to “Completing the FRU replacement” on page 147.

118 Hardware Maintenance Manual

Keine Kommentare

Lenovo Computer Monitor 7098 Bedienungsanleitung Seite 124