Lenovo Computer Monitor 7098 Bedienungsanleitung PDF herunterladen (Seite 53)

100

101

7. When prompted, insert a blank, formatted diskette into the diskette drive and

continue to follow the instructions on the screen.

8. When the operation is complete, remove the diskette and click Quit.

9. Insert another blank, formatted diskette into the diskette drive and continue to

follow the instructions on the screen.

10. When the operation is complete, remove the diskette and click Quit.

Running diagnostics from the CD or diskettes

To run diagnostics from the diagnostic CD image or diagnostic diskettes that you

created, use the following procedure:

1. Make sure the computer is turned off.

2. If you are running diagnostics from diskettes using a USB diskette drive, plug

in the USB device.

3. Insert the CD into the optical drive or the first diagnostic diskette into the

diskette drive.

4. Restart the computer.

Note: If the diagnostic program does not start, you might not have your optical

drive or diskette drive set as a startable device. See “Selecting a startup

device” on page 52 for instructions on how to change the startup device.

5. When the diagnostics program opens, follow the instructions on the screen.

Note: If you are running diagnostics from a diskette, when prompted, remove

the first diskette and insert the second diskette.

6. When the program finishes, be sure to remove the CD or diskette from the

drive.

7. Select the diagnostic test you want to run. Press the F1 key for additional help.

Navigating through the diagnostics programs

Use the cursor movement keys to navigate within the menus.

v The Enter key is used to select a menu item.

v The Esc key is used to back up to the previous menu.

v For online help select F1.

Running tests

There are four ways to run the diagnostic tests.

v Using the cursor movement keys, highlight Run Normal Test or Run Quick Test

from the Diagnostics menu and then press Enter.

This automatically runs a pre-defined group of tests from each test category.

Run Normal Test runs a more extensive set of tests than does Run Quick Test

and takes longer to complete.

v Press F5 to automatically run all selected tests in all categories.

v From within a test category, press Ctrl-Enter to automatically run only the

selected tests in that category.

v Using the cursor movement keys, highlight a single test within a test category,

and then press Enter. This runs only that test.

Press Esc at any time to stop the testing process.

Chapter 5. Diagnostics 47

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 797 798

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo Computer Monitor 7098 Bedienungsanleitung Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Lenovo Computer Monitor 7098