28
Chapter 2. Using your computer
Changing or removing the supervisor password
To change the password, do the following:
1 Select Set Supervisor Password, and press the Enter key. The Set
Supervisor Password window opens.
2 Select Enter Current Password and type in the correct password. Then
press Enter key once to move to Enter New Password field, type a new
supervisor password in.
3 Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4 Commit your password to memory, and press the Enter key.
To remove password, do the following:
1 Select Set Supervisor Password, and press the Enter key.
2 Select Enter Current Password and type in the correct password, and
press the Enter key thrice.
Note:
Make sure the Password on boot is set to Enabled if you need the
password protection at power on.
Kommentare zu diesen Handbüchern