1070 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1040 Memory/Wireless module/CPU (central processing unit) compartment
cover” on page 38
Figure 7. Removal steps of fan assembly and heat sink assembly
Note: Remove three screws
1
, one screw
2
and four spring screws
3
.
Unplug the connector in the direction shown by arrow
4
.
When installing: Make sure that the fan connector is attached rmly to the
system board.
Step Screw (quantity) Color Torque
1
M2.0 × 4 mm, at-head, nylon-coated (3) Black 1.5~2.0 kgf·cm
2
M2.0 × 3 mm, at-head, nylon-coated (1) Black 1.0~1.5 kgf·cm
3
M2.0 × 3.2 mm, with spring, nylon-coated (4) Silver 2.0~2.5 kgf·cm
Kommentare zu diesen Handbüchern