Chapter 2. Using Your Computer
29
Changing or Removing the User Password
To change the password, do the following:
1 Select Set User Password, and press the Enter key. The Set User
Password window opens.
2 Type the correct password in the Enter Current Password field. Press
Enter key once to move to the Enter New Password field, then type in
a new user password in.
3 Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4 Commit your password to memory, and press the Enter key.
To remove the password, do the following:
1 Select Set User Password, and press the Enter key.
2 Type the correct user password in Enter Current Password, and finally
press the Enter key thrice.
Note:
Make sure Password on boot is set to Enabled if you desire password
protection at power on.
Lenovo G230 UG V1.0_en.book Page 29 Monday, July 28, 2008 7:29 PM
Kommentare zu diesen Handbüchern