Lenovo RD120 Bedienungsanleitung PDF herunterladen (Seite 64)

2.5-inch drives

To remove a hot-swap hard disk drive, complete the following steps:

1. Read the safety information that begins on page v and “Installation guidelines”

on page 29.

2. Move the tray handle on the drive to the open position (perpendicular to the

drive).

3. Pull the hot-swap drive assembly from the bay.

Note: You might have to reconfigure the disk arrays after you remove a hard

disk drive.

you have other optional devices to install or remove, do so now. Otherwise, go to

“Completing the installation” on page 74.

Installing an optional tape drive

Prepare the drive according to the instructions that come with the drive, setting any

switches or jumpers; then, see “Installing a SATA tape drive in a 3.5-inch model

server” or “Installing a SATA tape drive in a 2.5-inch model server” on page 53.

Installing a SATA tape drive in a 3.5-inch model server

Install the optional SATA tape drive in the two bottom-left hard disk drive bays. If

hard disk drives are installed in those bays, move the drives to other bays. The

cables for the tape drive come with the tape drive.

50 ThinkServer RD120 Types 6444, 6445, 6446, and 6447: User Guide

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 117 118

Keine Kommentare

Lenovo RD120 Bedienungsanleitung Seite 64