Lenovo IdeaPad U310 Bedienungsanleitung PDF herunterladen (Seite 41)

Lenovo IdeaPad U310/U410 U310/U410 Touch

Figure 1. Removal steps of battery pack (continued)

The illustration below is the design sketch of Area B.

Note:

1. The yellow rectangles 1 and 2 below show rubber protrusions. Absorber

should not cover these.

2. Arched line 3, absorber should be cut along the arched line, against the black

mylar alignment. It must not overlap, so it does not interfere with fan.

Area C: Take a stepped-shaped absorber (100mm wide x 32mm high), and apply

it to the machine from the blue baselines (either arrow 1 or arrow 2) pointed to

by the blue arrow in the illustration below. When the starting positions are fixed,

press the absorber to make it flat.

The illustration below is the design sketch of Area C.

Note: If attaching starting from blue arrow 1, take care that the absorber does not

overlap in the area indicated by the red oval. Take care that the absorber does not

extend past the area indicated by the yellow line below, otherwise it will

interfere with the fan.

Area B

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 114 115

Keine Kommentare

Lenovo IdeaPad U310 Bedienungsanleitung Seite 41