Lenovo S40-40 All-in-One Bedienungsanleitung PDF herunterladen (Seite 50)

User Guide

7. Tighten the two screws to secure the monitor stand to the computer. Then, put

the rubber blocks into the holes to protect the screws.

Removing and reattaching the transformer stand

Attention: Do not remove the computer cover or attempt any repairs

before reading the “Important safety information” in the Safety and

Warranty Guide that was included with your computer or in the Hardware

Maintenance Manual (HMM) for the computer. To obtain copies of the

Safety and Warranty Guide or HMM,gototheSupportWebsiteat:

http://support.lenovo.com

This section provides instructions on how to remove and reattach the transformer

stand.

Note: The transformer stand is available only for some models.

To remove and reattach the transformer stand, do the following.

1. Remove all media from the drives and turn off all attached devices.

2. Turn off the computer and disconnect all power cords from electrical outlets.

3. Disconnect all cables attached to the computer.

4. Place a soft, clean towel or cloth on the desk or ﬂat surface. Hold the sides of

your computer and gently lay it down so that the screen is resting on the towel

or cloth and the cover is facing up.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 64 65

Keine Kommentare

Lenovo S40-40 All-in-One Bedienungsanleitung Seite 50