Lenovo IdeaCentre Q200 Bedienungsanleitung PDF herunterladen (Seite 25)

Hardware Replacement Guide

Important

Touch only the sides of the microprocessor. Do not touch the gold

contacts on the bottom.

15. Lift the microprocessor straight up and out of the socket.

Notes

a. Note the orientation of the notches on the microprocessor. This is

important when reinstalling the microprocessor on the new system

board.

b. Do not drop anything onto the microprocessor socket while it is

exposed. The socket pins must be kept as clean as possible.

16. On the new system board, release the lever securing the microprocessor

retainer and then pivot the retainer until it is fully open.

Note: There will be a black plastic cover on the microprocessor retainer

to protect the socket on the new system board. Remove the black plastic

cover and place it on the microprocessor socket of the failing system board.

17. Holding the microprocessor with your ﬁngers, position the microprocessor

so that the notches on the microprocessor are aligned with the tabs in the

microprocessor socket.

31032756_HaWaii-HRG_EN.indd 22 2008.1.8 3:31:37 PM

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 40 41

Keine Kommentare

Lenovo IdeaCentre Q200 Bedienungsanleitung Seite 25