37
Hardware Replacement Guide
Replacing the keyboard and mouse
To replace the keyboard:
1. Remove any media (disket, CDs, or memory cards) from the drives, shut down
the computer, and turn off all attached devices.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the keyboard. Refer to “Locating connectors on the
rear of the computer” and “Locating connectors on the front of the computer”.
Note: YourkeyboardwillbeconnectedtoaUSBconnectorateitherfrontor
at the rear of the computer.
4. Disconnect the defective keyboard cable from the computer and connect the
new keyboard cable to the same connector.
5. Refer to the “Completing the installation”.
6. The mouse can be replaced using the same method.
Kommentare zu diesen Handbüchern