Lenovo ThinkServer TD200 Bedienungsanleitung PDF herunterladen (Seite 116)

Note: Do not allow the server to fall over.

4. Follow the cabling instructions that come with the adapter to set jumpers or

switches, if there are any. Route the adapter cables before you install the

adapter.

5. Rotate the rear adapter-retention bracket to the open (unlocked) position.

6. If you are installing a full-length adapter, press on the release lever on the right

side of the front adapter-retention bracket to release the retaining tab on the

left side of the bracket.

7. Carefully grasp the adapter by the top edge or upper corner, and move the

adapter directly from the static-protective package to the adapter slot. Align the

adapter with the expansion slot guides; then, press the adapter firmly into the

expansion slot. For a full-length adapter, make sure that the front edge of the

adapter is properly seated in the correct slot in the front adapter-retention

bracket.

Note: Make sure that the adapter is seated correctly in the expansion slot

before you turn on the server. Incomplete installation of an adapter might

damage the system board or the adapter.

98 ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 227 228

Keine Kommentare

Lenovo ThinkServer TD200 Bedienungsanleitung Seite 116