Lenovo ThinkServer RD210 Bedienungsanleitung PDF herunterladen (Seite 5)

Pull out the mounting bracket pin 1 and slide the

mounting bracket 2 into the slide rail onto which

you are installing the cable-management arm. Push

the bracket into the slide rail until the

spring-loaded pin snaps into place.

Place the cable-management arm on the support

arm. Pull out the cable-management arm pin 1,

and then slide the cable-management arm tab 2

into the slot on the inside of the slide rail. Push the

tab until it snaps into place. Pull out the other

cable-management arm pin 3, and then slide that

cable management arm tab into the slot 4 on the

outside of the slide rail. Push the tab until it snaps

into place.

Attach the power cords and other cables to the rear

of the server (including keyboard, monitor, and

mouse cables, if required). Route the cables and

power cords on the cable-management arm 1 and

secure them with cable ties or hook-and-loop

fasteners.

Note: Allow slack in all cables to avoid tension in

the cables as the cable-management arm moves.

Slide the server into the rack until it snaps into

place. To slide the server out of the rack, press on

the release latches 1.

Note: When you move the rack cabinet, or if you

install the rack cabinet in a vibration-prone area,

insert the optional M6 screws 2 in the front of the

server.

1 2 3 4 5 6 7

Keine Kommentare

Lenovo ThinkServer RD210 Bedienungsanleitung Seite 5