Lenovo Flex System x240 Betriebsanweisung Seite 15

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 42
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 14
Flex System x240 Compute Node (E5-2600 v2) 15
Table 8. Maximum memory speeds (Part 2 - Single-rank and dual-rank RDIMMs)
Specification RDIMMs
Rank Single rank Dual rank
Part numbers 00D5024 (4 GB)
00D5036 (8 GB)
00D5044 (8 GB)
46W0672 (16 GB)
00D5028 (4 GB)
00D5040 (8 GB)
00D5048 (16 GB)
Rated speed 1600 MHz 1600 MHz 1866 MHz
Rated voltage 1.35 V 1.35 V 1.5 V
Operating voltage 1.35 V 1.5 V 1.35 V 1.5 V 1.5 V
Max quantity† 24 24 24 24 24
Largest DIMM 8 GB 8 GB 16 GB 16 GB 16 GB
Max memory
capacity
192 GB 192 GB 384 GB 384 GB 384 GB
Max memory at
rated speed
None 128 GB None 256 GB 256 GB
Maximum operating speed (MHz)
One DIMM per
channel
1333 MHz 1600 MHz 1333 MHz 1600 MHz 1866 MHz
Two DIMMs per
channel
1333 MHz 1600 MHz 1333 MHz 1600 MHz 1866 MHz
Three DIMMs per
channel
1066 MHz 1066 MHz 1066 MHz 1333 MHz /
1066 MHz*
1333 MHz /
1066 MHz**
† The maximum quantity that is supported is shown for two processors installed. When one processor is installed,
the maximum quantity that is supported is half of that shown.
* 00D5044 (8 GB) operates at 1066 MHz at three DIMMs per channel; 46W0672 (16 GB) operates at 1333 MHz at
three DIMMs per channel
** 00D5028 (4 GB) and 00D5040 (8 GB) operate at 1066 MHz at three DIMMs per channel; 00D5048 (16 GB)
operates at 1333 MHz at three DIMMs per channel
The following memory protection technologies are supported:
ECC
Chipkill (for x4-based memory DIMMs -- look for "x4" in the DIMM description)
Memory mirroring
Memory sparing
If memory mirroring is used, then DIMMs must be installed in pairs (minimum of one pair per CPU), and
both DIMMs in a pair must be identical in type and size.
If memory rank sparing is used, then a minimum of one quad-rank DIMM or two single-rank or dual-rank
DIMMs must be installed per populated channel (the DIMMs do not need being identical). In rank sparing
mode, one rank of a DIMM in each populated channel is reserved as spare memory. The size of a rank
varies depending on the DIMMs installed.
Seitenansicht 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare