Lenovo THINKPAD T41/T41P Bedienungsanleitung PDF herunterladen (Seite 39)

computer enters the power-saving mode automatically.

This default low-battery behavior is independent of the

operating system; so if you have set the low-battery alarm,

the computer may not do what you specified. It chooses

either your setting or the default setting, whichever is

appropriate.

If you are using the ACPI operating system, only the

low-battery alarm is available.

To cause the computer to return from standby mode and

resume operation, do one of the following:

v Press the Fn key.

v Open the LCD cover.

v Turn on the power switch.

Also, in either of the following events, the computer

automatically returns from standby mode and resumes

operation:

The ring indicator (RI) is signaled by a serial device or a

PC Card device.

v The time set on the resume timer elapses.

Note: The computer does not accept any input

immediately after it enters standby mode. Wait a

few seconds before taking any action to reenter

operation mode.

Hibernation mode

Note for OS/2

If you are using OS/2 in the default format, HPFS,

you cannot create a hibernation file. If you want to

use hibernation mode, you will need to reinstall

OS/2 with FAT format.

In hibernation mode, the following occurs:

v The system status, RAM, VRAM, and setup data are

stored on the hard disk.

v The system is powered off.

Note:

If the computer enters the hibernation mode while it

is docked to the docking station, do not undock it

before resuming normal operation. If you do undock

it and then try to resume normal operation, you will

get an error message, and you will have to restart

the system.

To cause the computer to enter hibernation mode, do any

of the following:

v Press the Fn+F12 keys.

Related service information

General descriptions 33

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 259 260

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo THINKPAD T41/T41P Bedienungsanleitung Seite 39

Kommentare zu diesen Handbüchern