Lenovo B8080 Hardware Maintenance Manual
1040 Vibrator motor
For access, remove the following FRU:
• “1010 Rear cover” on page 28
1. Disconnect the power supply to the tablet by detaching the battery FPC from
its connector on the main board using a guitar pick.
Figure 4-1. Disconnecting the power supply of the tablet
2. Desolder the wires of the vibrator motor from the sub board at the position
shown in the figure below.
Figure 4-2. Position for desoldering the wires of the vibrator motor
42
Kommentare zu diesen Handbüchern