Lenovo ThinkVision Pro2820 28 inch FHD MVA LED Backlit LC Bedienungsanleitung Seite 18

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 35
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 17
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is
normal and the image can be readjusted using automatic image setup and the image
controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat
Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-attach
the CRT monitor temporarily until you have re-configured the system; preferably to
1920x1080 at 60Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table2-3.Factoryset display modes
Addressability Refresh rate
640x480 60Hz,75Hz
720x400 70Hz
800x600 60Hz,75Hz
1024x768 60Hz,75Hz
1152x864 75Hz
1280x720 60Hz
1280x800 60Hz
1280x1024 60Hz,75Hz
1366x768 60Hz
1440x900 60Hz
1600x900 60Hz
1680x1050 60Hz
1920x1080 60Hz
Understanding power management
Power management is invoked when the computer recognizes that you have not using
your mouse or keyboard for a user-definable period. There are several states asdescribed in
the table below.
For optimal performance, switch off your monitor at the endof each working day, or
whenever you expect to leave it unused for long periods during the day.
Table2-4.Power indicator
State Power Indicator Screen Restoring Operation Compliance
On Steady green Normal
Standby/
Suspend
Steady amber Blank
Press a key or move the mouse.
There may be a slight
delay reappears.
Note: Standby also occurs
if there is no image output to the
monitor.
ENERGY STAR
Off Off Off
Press power key to switch on
There may be a slight delay before
the image reappears.
ENERGY STAR
Chapter2.Adjusting and Using
yourmonitor
2-6
Seitenansicht 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare