Lenovo 8095 Bedienungsanleitung PDF herunterladen (Seite 34)

4. Remove the metal shield from the drive bay by inserting a flat-blade

screwdriver into one of the slots and gently prying it loose.

5. If you are installing any type of drive other than a serial ATA hard disk drive,

make sure the drive that you are installing is set correctly as either a master or

a slave device.

Note: A serial ATA hard disk drive does not need to be set as either a master

or a slave device.

v If it is the first optical drive, set it as a master device.

v If it is an additional optical drive, set it as a slave device.

v If it is an additional parallel ATA hard disk drive, set it as a slave device.

Refer to the documentation that comes with your drive for master/slave

jumper information.

6. For a 5.25-inch drive, install a retainer bracket on the side of the drive.

7. For a 3.5-inch drive, install the drive into the Universal Adapter Bracket, 5.25 to

3.5-inch.

18 User Guide

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 61 62

Keine Kommentare

Lenovo 8095 Bedienungsanleitung Seite 34