Lenovo IdeaCentre A700 Bedienungsanleitung PDF herunterladen (Seite 39)

Chapter 8. Replacing hardware

12. Install the new optical drive.

(1) Slide the new optical drive into the drive bay and screw it in.

(2) Align then screw in the new hard disk drive and bay to the chassis.

13. Install hard disk drive and motherboard cover back.

14. Install the computer cover and stand.

Replacing a memory module

Attention

Turn oﬀ the computer and wait 3 to 5 minutes to let the computer

cool down before replacing a memory module.

Note

For this procedure, it helps to place the computer face-down on a

soft ﬂat surface. Lenovo recommends that you use a blanket, towel,

or other soft cloth to protect the touch screen surface from scratches

or other damage.

To replace the memory module:

1. Remove any media (diskettes, CDs, or memory cards) from the drives,

shut down the operating system, turn oﬀ all attached devices, and the

computer.

2. Unplug all power cords from electrical outlets.

3. Disconnect all cables attached to the computer. This includes power

cords, input/output (I/O) cables, and any other cables that are

connected to the computer. Refer to “Locating connectors on the rear

of the computer”.

4. Remove the computer stand. Refer to “Removing the computer stand”.

5. Remove the computer cover. Refer to “Removing the computer cover”.

6. Remove the motherboard cover. Refer to “Removing the motherboard

cover”.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 58 59

Keine Kommentare

Lenovo IdeaCentre A700 Bedienungsanleitung Seite 39