Lenovo HS22V Betriebsanweisung PDF herunterladen (Seite 2)

High-performance blade server optimized for virtualization

Please see the Legal Information section for important notices and information.

complexity and lower cabling costs, and it allows clients to manage everything in the solution as

one. Using a BladeCenter E chassis, up to 84 HS22V servers (168 processors) can be installed

in one industry-standard 42U rack; but the value of BladeCenter extends far beyond high

density data center environments.

The various BladeCenter chassis are designed to monitor environmental conditions in the chassis

and each blade and send alerts to the administrator. Advanced standard features, such as Active

Memory

™

, Predictive Failure Analysis, light path diagnostics, hot-swap redundant hard

disk drives, power supplies and blower modules with Calibrated Vectored Cooling

™

; IPMI

2.0 support, including highly secure remote power control; text-console redirect over LAN,

next-generation BIOS (UEFI), an Advanced Management Module (upgradeable with a

redundant AMM), IBM Systems Director management software including IBM Systems

Director Active Energy Manager™. Remote Deployment Manager and IBM ServerGuide

™

help maintain system availability with increased uptime.

If you need highly manageable, high-performance virtualization in a space- or power-constrained

environment, the HS22V is the ideal system.

Selling Features

Price/Performance

• There is an HS22V model to fit all budgets. The HS22V offers a choice of high-performance 6-core/4-

core/2-core Xeon processors with integrated memory controllers, clock rates from 1.6GHz to

3.6GHz, and from 3MB to 12MB of shared cache (processor-specific) of integrated Level 3 cache.

Xeon 5600 series processors offer up to 60% better performance

than the previous-generation 5500

series processors and up to 1,500% better performance than the single-core processors of a few

years ago that you may still be using.

• Low-voltage processors draw less energy and produce less waste heat than higher-voltage

processors, thus helping to reduce data center energy costs. On a per-core basis, the standard 80W

processors are extremely economical, consuming as little as 13.33W per core. Some low-voltage

Xeon processors consume only10W per core (4-core 40W or 6-core 60W).

• Up to 288GB of registered DDR3 ECC memory operates at 800MHz to 1333MHz (depending on

the system configuration), for high performance and wide memory bandwidth.

• Run two DIMMs per memory channel (2DPC) at 1333MHz in specific 5600 series processor

configurations

• Embedded virtualization (optional on all models) offers extremely high performance, enhanced

security, and a zero-gigabyte HDD footprint. (In other words, no mechanical HDD to fail.)

• Solid state drives (SDDs) use only 2W of energy per drive, vs. 7-10W for 2.5-inch HDDs. This is as

much as 80% less energy than a HDD would use (with a corresponding reduction in heat output).

• Low -voltage 1.35 volt memory draws up to 19% less power than 1.5V DIMMs.

• Selected HS22V blade servers are planned for NEBS3/ETSI-compliance and feature long-life

availability. These blades are ideal for telecom or Next Generation Network (NGN) applications such

as IPTV, IP Multimedia Subsystem (IMS) and security.

• The extremely high degree of integration in the various BladeCenter chassis reduces the need for

server components, replacing numerous fans, KVM and Ethernet cables, power supplies, external

switches and other components with fewer shared hot-swap/redundant components in the

BladeCenter chassis itself. This integration also can greatly reduce the amount of power consumed

and heat produced, relative to an equivalent number of 1U servers. This can significantly reduce a

data center power bill. The reduced data center footprint can also save on infrastructure cost.

• The midplanes used in all chassis provide high-speed blade-to-blade, blade-to-switch-module

and module-to-module communications internally as well as externally. The midplanes used in

the BladeCenter H and BladeCenter HT chassis provide four 10Gb data channels to each blade,

and supports high-speed switch modules, including 4X InfiniBand and 10Gb Ethernet.

• The various BladeCenter chassis use ultrahigh efficiency power supplies. Many industry-standard

servers use power supplies that are only 70-80% efficient at converting power from AC wall current

to the DC power used inside servers. BladeCenter power modules are up to 94% efficient (and meet

the 80 Plus

Platinum Standard). This helps save even more money, as more of the power input

you are paying for is used for processing, rather than released into the data center as waste heat that

requires even more energy to cool.

• BladeCenter also reduces the number of parts required to run the system. Sharing fans, systems

management, floppy devices and media means fewer parts to buy and maintain, and fewer items that

can fail and bring the overall solution down.

Flexibility

The HS22V has the ability to grow with your application requirements, thanks to:

Based on Intel measurements.

1 2 3 4 5 6 7 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo HS22V Betriebsanweisung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server Lenovo HS22V